ELECTROLUX-REX PZ-T1OV Installationshandbuch Seite 4

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 15
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 3
Cleaning and maintenance
Before any intervention it is necessary to control
the appliance is UNCONNECTED from the electricity
supply.
General cleaning
Wash the enamelled parts with warm water and detergent,
avoiding to use abrasive products which could scratch it.
Wash often the crowns and the grid caps with boiling
soapy water, pay attention to scrape every scale off.
After the use rinse the stainless steel parts carefully using
water, and dry them with a soft cloth.
For persistent spots use normal non abrasive detergent
easy commonly to be found in commerce. We recommend
you not to use for the cleaning straw hats, steel wools or
acids.
Cleaning of the electrical ignition
The automatic ignition of the burners is assured by the
presence of a ceramic “glow plug” and by a metal long-
distance line. (indicated on picture 1 with letter C).
Periodically proceed with an accurate cleaning of these
parts of the hob. In order to avoid any difficulty in the
ignition, control that the holes of the crown (letter B) are
not clogged
Hob’s grids.
Hobs can be equipped by stainless steel grids (see picture
2) or cast iron grids (bigger and heavy – see picture 3).
The grids can be taken off to enable a better cleaning. Lift
the grids up form the hob.
Grids and chromium-plated grids
caps.
Grids and chromium-plated grids caps tend to darken with
their use. This is an absolute regular and unavoidable
phenomenon but it does not absolutely compromise the
hob functionality..
By the way, upon request, there are enamelled grids and
grids caps available by your retailer or our Technical
Assistance Centres.
Picture 2
Picture 3
Periodic maintenance.
The condition of the gas-supply pipe should be checked
periodically and, if present, the condition of the pressure
control. If you find any irregularities do not ask to repair
them but ask for their replacement. To grant the proper
working and safety it is necessary to periodically grease
the gas regulation cocks.
The periodic lubrication of the gas cocks must be
done by QUALIFIED PERSONNEL ONY whom has to
be contacted in case of anomalies to the appliance
working.
4
Seitenansicht 3
1 2 3 4 5 6 7 8 9 ... 14 15

Kommentare zu diesen Handbüchern

Keine Kommentare